How to Restore Dead/Fried Multi TV Strong Decoder to Its Original State

Many of our forums users usually ask me how to restore the dead multi TV Strong decoder to its original state. Actually, if the multi tv strong decoder has not been hit by any heavy object or fire then keep scrolling. There is a method to bring it back to life. In this write-up, two solutions will be discussed. One is how you can wake your dead or fried original strong decoders through pc and rs-232 cable.

But for those who have genuine decoders, complete the instructions below on how you can wake up your dead strong decoder.

So one may ask, how can I fry my multi tv strong decoder? Well, you can fry your multi tv strong decoder in so many ways. For instance, you may fry your multi tv strong decoder if you upload a file that is corrupted or contains viruses to it. Or by updating it with incompatible firmware.

There are two major methods to wake a fried strong decoder

i. Via a pc with the help of RS-232 cable

ii. Via decoder to decoder through inter-decoder firmware transfer

How Do I resurrect a dead strong decoder with another strong decoder?

  1. you need an rs-232 cable

  2. With another working decoder of that same model

  3. Now connect the two decoders through the rs232 and remember to switch off the fried one

  4. Now switch on the working one.

  5. With your remote control, go to – system setting

  6. After that select data transfer

  7. Select firmware and press ok. Now, wait till it completes loading.


==> Get the strong loader for strong in middle east and Africa

==> Download the software compatible with your decoder model from the list there

==> Now save the loader and the software on your computer

==> Insert the srt loader and click on the browse button.

==> locate your software and select

==> Now connect your decoder with the rs-232 cable and

==> Click auto-detect on the loader menu.

Wait for the process to complete.